Kompernass Meat Grinder KH 3460 User Manual

UK  
Kompernaß Handelsgesellschaft mbH  
Burgstr. 21 • D-44867 Bochum  
ID-Nr. KH3460/07-04V2  
 
 
Ƹ
¹
ƹ
ƺ
ƻ
¸
µ
Ƽ
 
Professional Meat Grinder  
Bifinett KH 3460  
Contents  
2. Technical Data  
GB  
1. Intended use .............................. 3  
2. Technical data ............................ 3  
3. Delivery contents ...................... 3  
4. Safety instructions .................... 4  
5. Assembly.................................... 5  
6. Operation .................................. 7  
7. Troubleshooting.......................... 9  
8. Cleaning .................................... 9  
9. Storage .................................... 10  
10. Disposal.................................... 10  
11. Warranty and service ................10  
Voltage ....................: 230 V / ~50 Hz  
Power consumption : 550 W max.  
Weight ....................: 4,57 kg approx.  
Dimensions (mm) ....: 325x160x317  
3. Delivery Contents  
Motor block  
Meat grinder casing  
Transport screw  
Cross blade  
1. Intended use  
This appliance is meant to be usedfor  
processing foods in small quantities,  
enough for private households.  
cutting discs for coarse  
and fine grinds  
µ
¸
¹
Ƹ
ƹ
ƺ
ƻ
Ƽ
Ring clamp  
Feeding tray  
Mincing fresh meat,  
Round stodger  
Making sausages with natural or  
artificial sausage skin,  
Sausage disc  
Grating vegetables  
Sausage attachment  
Kubbe attachment  
Grater funnel  
Crushing fruit with seeds as well as  
seedless fruits.  
Making shortbread cookies  
Square stodger  
This appliance is not meant to be  
used for processing frozen foods or  
other hard foodstuffs, e.g. bones or  
nuts. It is not to be used for commer-  
cial or industrial purposes.  
Coarse grater attachment  
Fine grater attachment  
Cutter attachment  
Shortbread cookies attachment  
3
Keep this manual for future reference and pass it on with the device to any future  
users!  
 
4. Safety Instructions  
4. Safety Instructions  
To avoid life-threatening electric  
shocks:  
To avoid the risk of accidents and  
injuries:  
Make sure that the cable is not  
damaged. Protect the cable from  
heat and make sure that it does  
not get stuck or clamped.  
Never put your hand into the  
openings of the appliance. Do  
not insert any objects through  
the openings – except for the  
appropriate stodger and the food-  
stuff to be processed. Otherwise,  
there are chances of a serious risk  
of accidents!  
GB  
If the cable or the electric plug  
is damaged, get it replaced by  
customer service, before you con-  
tinue using the appliance.  
Unplug the appliance, before  
attaching or removing the acces-  
sories.  
Use the appliance only in a dry  
areas, and not outdoors.  
Never immerse the motor in  
water or other liquids! You might  
suffer from a life-threatening elec-  
tric shock.  
Do not leave the appliance unsu-  
pervised, when it is ready for use.  
Always unplug the appliance after  
use or during breaks in order to  
avoid it from being turned on acci-  
dentally.  
Only use original accessories,  
which are meant for this appli-  
ance. Other parts may probably  
not meet the safety requirements.  
Warning!  
Never use the appliance for any  
other purposes other than those  
listed here. There is a major possi-  
bility of accidents if you mistakenly  
happen to turn off the safety device  
of the appliance!  
Do not allow children and elderly  
people to handle the appliance  
without supervision, since they  
may not always be able to assess  
potential hazards.  
4
 
5.  
Assembly  
5. Assembly  
All accessories are coated with a thin  
oil film to protect them from corrosion.  
Therefore clean all the parts carefully  
before using the appliance for the first  
time, in accordance with the detailed  
instructions found under “8 Cleaning”.  
The assembled meat grinder is con-  
nected by a bayonet joint to the  
motor block :  
GB  
- Insert the meat grinder into the  
motor block. The arrow on the  
mincer casing should be on the  
symbol “offen” (open) (Fig. A).  
a) Assembling the meat grinder  
- Press in the meat grinder lightly.  
Turn the stuffing funnel of the  
meat grinder upwards till it is ver-  
tical (Fig. B).  
Unfold the fold out. There you will find  
the step-by-step illustrations for  
assembling the appliance.  
Place the transport screw with  
the hexagonal axle in the mincer  
casing .  
- To take it out, once again press  
down the meat grinder lightly and  
turn the stuffing funnel in the  
direction of the symbol ”offen“  
(Fig. A). Now you can pull out the  
meat grinder.  
Ensure that the metal washer  
remains on the hexagonal axle.  
Without the washer, the screw  
would close too fast.  
Finally place the feed tray on  
top on the stuffing funnel.  
Now place the cross blade so  
that the sharp side is facing the  
cutting disc . Warning - the  
blade is very sharp!  
b) Fixing the sausage stuffer  
attachment  
Attention: the device can get dam-  
aged if the cross blade is wrongly  
inserted in the opposite direction!  
Once the meat grinder has been  
assembled as described under a):  
Turn open the ring clamp and ...  
Choose the appropriate cutting  
disc – You can find the discs in the  
small recess at the top of the  
device (Fig. D).  
Replace the cutting disc with  
the sausage disc . This can be  
found in the small recess (Fig. D)  
on the top of the device. Fix this in  
as described in a).  
For this push the cover upwards  
and take out the required disc.  
Now place the sausage stuffer  
attachment µ in front of the  
sausage disc, ...  
Insert both the edges of the chosen  
disc into the slots in the mincer  
casing .  
before screwing on the ring clamp  
tightly.  
After everything has been assem-  
bled correctly, screw on the ring  
clamp tightly.  
5
 
c) Fixing the kubbe attachment  
Once the meat grinder has been  
assembled as described under a):  
To remove once again press in the  
grater funnel lightly and turn it in  
the direction of the symbol "open“  
(Fig. A). Now you can take out the  
grater funnel.  
Turn open the ring clamp and ...  
GB  
Replace the cutting disc with the  
two plastic parts of the kubbe  
attachment ¸. Fix these as  
described in a).  
e) Fixing the shortbread cookie  
attachments  
When everything has been  
attached correctly, screw on the  
ring clamp tightly.  
Once the meat grinder has been  
assembled as described under a):  
Turn open the ring clamp and ...  
d) Fixing the grater and cutter  
attachments  
take out the cutting disc and the  
cross blade .  
When the meat grinder has been  
removed from the motor block:  
Remove the pattern strips from the  
shortbread cookie attachment Ƽ  
and ...  
First select the appropriate attach-  
ment. You can choose from...  
place the shortbread cookie  
attachment in the mincer casing  
¹.  
- a coarse grater ƹ,  
- a fine grater ƺ,  
Insert both the edges of the short-  
bread cookie attachment Ƽ into  
the slots in the mincer casing ¹.  
- a cutter attachment ƻ.  
Fix the grater or cutter attachment  
in the provided round recesses in  
the grater funnel. ¹.  
When everything has been  
attached correctly, screw on the  
ring clamp tightly and ...  
Place the grater funnel in the motor  
block in such a way that the arrow  
of the grater funnel points to the  
symbol ”open“.  
once again attach the pattern  
strips to the front part of the short-  
bread cookie attachment.  
Press in the grater funnel lightly  
and turn it upwards till it is in a ver-  
tical position.  
To remove you must again remove  
the pattern strip first, before turn-  
ing open the ring clamp and  
taking out the shortbread cookie  
attachment Ƽ.  
6
 
6. Operation  
6. Operation  
Attention: In the case of foods, which  
need to be processed at high speeds,  
the appliance should not be run for  
longer than 10 seconds (!) at a  
First press the OFF button, to  
ensure that the appliance is off.  
Then plug in...  
GB  
stretch. Let there be a break of 30  
seconds before switching it on again,  
to prevent the motor from overheating.  
and set it to ON , to switch it on.  
Now push in the food with the  
round or square stodger Ƹ in  
the feeding tube - never with one’s  
fingers, forks, spoons or similar  
objects. This could lead to injury  
and also damage the appliance.  
One can tell that the machine is being  
overused when the sound of the motor  
changes and slows down.  
a) Operating the appliance  
Once the appropriate attachments  
have been fixed:  
Attention: Do not ever press so  
hard that the motor gets audibly  
slower. This could put the machine  
under pressure and damage it.  
Place the appliance in such a way  
that it is absolutely stable and  
cannot fall off the table or into  
water (due to vibrations or if it gets  
caught in the cable). . The machine  
will inevitably vibrate when it is run-  
ning.  
b) Processing meat  
Only use meat pieces, which are  
not larger than 2 cm. Check that  
the meat does not have any bones  
and is not stringy.  
Warning: Never touch a machine,  
which is plugged in or is operational  
when it happens to fall or land in  
water – or in the case of other  
emergencies!  
Caution: Mincemeat is prone to  
decay. Therefore take care to main-  
tain good hygiene when processing  
meat.  
First unplug the appliance in all  
emergency situations! Otherwise  
one runs the risk of serious injury or  
loss of life!  
When you have read all the instruc-  
tions on the topic ”Meat“, you can  
use the appliance as described  
under 6.a).  
Place the food, which is to be  
processed in the feeding tray and  
place a vessel to collect the  
processed food in front under the  
opening.  
7
 
c) Processing sausage meat  
d) Grating and cutting  
Put the meat through the meat  
grinder twice before using it as  
sausage stuffing.  
After you have placed the food to be  
grated into the feeding tray:  
Push them with the square stodger  
Ƹ into the feeding tube ¹.  
GB  
To make the sausage stuffing, add  
some chopped onions, spices and  
other ingredients to the mincemeat  
as per your recipe, and knead the  
mixture. Refrigerate this for 30 min-  
utes before processing it further.  
If some food is stuck on the grating  
attachments: Switch off the  
device before removing the  
attachments or reaching in to  
clean them. Otherwise there is the  
risk of getting injured.  
Put the sausage skin (natural or  
artificial sausage skin) on the  
sausage stuffer attachment10 and  
knot up the other end. For 1 kg of  
the filling, you will need approxi-  
mately 1.60 m of sausage skin.  
After you have read all the instruc-  
tions about the topic “Grating and  
cutting“, you can use the machine  
as described under 6 a).  
Tip: Soak the natural sausage skin  
in lukewarm water for about 3  
hours before using it and then  
wring out. Natural sausage skin will  
thus get more elastic.  
e) Using the kubbe attachment  
With the kubbe attachment foodstuffs  
can be processed to form hollow rolls  
of meat or vegetables, which can then  
be stuffed as desired.  
Put the meat through the meat  
grinder twice before pressing it  
through the kubbe attachment.  
The sausage mixture will be  
pressed into the sausage skin by  
the sausage stuffer. When it is long  
enough switch off the device and  
press together the sausage at the  
end and turn it around its longitudi-  
nal axis.  
After you have read all the instruc-  
tions about the topic “Kubbe  
attachment“, you can use the  
machine as described under 6 a).  
Tip: Sausage meat tends to  
expand when cooked or frozen.  
Therefore it is best not to overstuff  
the sausage to prevent it from  
splitting.  
f) Making shortbread cookies  
After you have made the shortbread  
dough according to your recipe, and  
after having fixed the shortbread cookie  
attachment:  
After you have read all the instruc-  
tions about the topic “Sausage“,  
you can use the machine as  
described under 6 a).  
Line a small baking tray with  
greaseproof paper and place or  
hold it directly under the opening in  
the front of the appliance.  
8
 
In case this does not work, wait for  
a further 15 minutes.  
Press dough evenly into the feed-  
ing tube – the transport screw  
pushes it through the design on the  
pattern strip of the shortbread  
cookie attachment Ƽ.  
If it still does not function at the  
end of this period, this indicates a  
technical problem. In this case,  
contact the service centre.  
GB  
After you have read all the instruc-  
tions about the topic ”shortbread  
cookie attachment“, you can use the  
appliance as described under 6 a).  
If themains cable is damaged or or  
the accessories are visibly damaged:  
Switch off the device by pressing  
the OFF button!  
if this is not safely possible unplug  
the appliance.  
Warning:  
Never open the casing of the  
motor block– There are no operat-  
ing parts to be found there. If the  
casing is opened there exists the  
possibility of a life-threatening  
electric shock.  
Get the parts be repaired by cus-  
tomer service, before reusing the  
appliance again.  
8. Cleaning  
Pull out the plug from the socket,  
before cleaning the appliance.  
In this way accidents caused by the  
unexpected switching on of the  
machine and electric shocks can be  
prevented.  
7. Troubleshooting  
If the smooth running of the appliance  
is hampered by excessive or stuck  
food:  
Keep the REV key pressed. The  
machine will now run in the reverse  
direction. This will enable you to  
dislodge the food, which has got  
stuck, and the machine will once  
again run smoothly.  
a) Cleaning the Motor block  
Clean the external surfaces and  
the power cord with a slightly  
damp cloth. Always dry the device  
well before using it again.  
If you do not succeed by doing so,  
clean the machine as described  
under 8.  
Warning: Never immerse the motor  
block in water or any other liquid!  
Otherwise one could get a life  
threatening electric shock, if mois-  
ture, which has crept in, touches  
the electrical wiring.  
If the motor stops suddenly, it could  
be due to the internal overload warn-  
ing device, which automatically turns  
off the machine when overloaded. This  
is supposed to protect the motor.  
Switch off the device and let it cool  
down for approximately 15 minutes  
before using it again.  
9
 
Never use any cleansers, abrasive  
substances or solvents. These  
could damage the device.  
Keep the machine away from chil-  
dren and elderly people. They may  
not always be able to assess  
potential dangers of the heating  
elements of such devices.  
GB  
b) Cleaning accessories  
Wash all the accessories that can  
come in contact with food, ...  
10. Disposal  
- by hand only, the accessories  
are not dishwasher safe.  
Tip: Care for the environment.  
If you wish to dispose of the device,  
dispose of it at a collection site for  
recycling of electronics.  
- with hot water and a household  
cleaning liquid suitable for food-  
stuff surfaces  
Make the appliance unusable by  
removing the plug before disposing of  
the appliance, in order to prevent acci-  
dents caused by children playing with  
the appliance.  
Caution: The cross blade and the  
shredder attachments are very  
sharp!  
Dry all parts thoroughly, before  
reusing the appliance.  
Ensure that sharp parts (cross blade,  
shredder attachments) are removed to  
protect children.  
9. Storage  
Wind the mains cable under the  
bottom part of the appliance. In  
this way, it is protected from dam-  
age.  
11. Warranty and service  
The warranty conditions and service  
centre address can be found in the  
enclosed warranty slip.  
Store the discs in the small recess  
(Fig. D) on top of the machine.  
Store the appliance in a dry place.  
After drying the metal attachments  
rub them lightly with a little cooking  
oil, if you are not going to use the  
device immediately. This will pro-  
tect them from corrosion.  
10  
 

InFocus Saw CR 13V User Manual
Intel Life Jacket AEDIT 86 User Manual
Ironman Fitness Treadmill Ironman series User Manual
Jet Tools Trimmer M 754031 06 01 User Manual
JVC Stereo Receiver RX D701S User Manual
Kenmore Sewing Machine 385101118 User Manual
Kenmore Washer 1102952 User Manual
KitchenAid Frozen Dessert Maker KICA User Manual
KitchenAid Outdoor Storage KSSS42QDW05 User Manual
Kompernass Hair Dryer KH 1801 User Manual