Kompernass Electric Shaver KH 5540 User Manual

6
Men‘s Shaver  
KH 5540  
Men‘s Shaver  
Operating instructions  
KOMPERNASS GMBH · BURGSTRASSE 21 · D-44867 BOCHUM  
ID-Nr.: KH5540-04/09-V3  
 
CONTENT  
PAGE  
Intended Usage  
2
2
2
2
3
3
3
3
Safety instructions  
Items supplied  
Description of the appliance  
Technical Data  
Shaving without the power cable  
Shaving using the power adapter  
Intended purpose  
Shaving..............................................................................................................................................3  
Trimming ............................................................................................................................................4  
Changing the cutters  
Cleaning and care  
4
4
Cleaning with the brush...................................................................................................................4  
Cleaning under running water........................................................................................................4  
Thorough cleaning............................................................................................................................5  
Storage  
5
6
6
7
Disposal  
Warranty and Service  
Importer  
Read these operating instructions carefully before using the appliance for the first time and preserve this  
maual for later reference. Pass this manual on to whoever might acquire the appliance at a future date.  
Download from Www.Somanuals.co-m1.-All Manuals Search And Download.  
MEN‘S SHAVER KH5540  
To avoid the risks of fire or injury:  
• Use only the original accessory parts for this  
appliance. Other accessories may not meet the  
safety requirements.  
• Discontinue using the appliance if there is visible  
damage to the cutting heads or if the cutting heads  
suddenly become hot.  
Intended Usage  
This appliance is intended exclusively for shaving and  
trimming human hair. Do not use it in commercial or  
industrial applications.  
Items supplied  
Safety instructions  
Men‘s Shaver  
Protective cap  
Cleaning brush  
Storage case  
Operating instructions  
Order card  
• This appliance is not intended for use by individuals  
(including children) with restricted physical, physio-  
logical or intellectual abilities or deficiences in  
experience and/or knowledge unless they are  
supervised by a person responsible for their safety  
or receive from this person instruction in how the  
appliance is to be used.  
After the unpacking, remove all wrapping materials  
and protective foils from the appliance. Check to  
ensure that all listed items have been supplied.  
• Children should be supervised to ensure that  
they do not play with the appliance.  
• Arrange for defective power plugs and/or cables  
to be replaced at once by qualified technicians  
or our Customer Service Department.  
Description of the appliance  
NEVER immerse the appliance in water or any  
other liquid!. This would cause irreparable  
damage to the appliance.  
1 Cutting heads  
2 Cutting unit  
3 Release button  
4 Locking button  
5 On/Off switch  
6 Battery charge indicator  
7 Socket  
NEVER use the appliance whilst in the bath  
or under the shower. Risk of electric shock!  
• Do NOT take the appliance into use if there is  
visible damage to either the appliance itself or  
the power cable. Risk of injury!  
8 Storage case  
9 Brush  
0 Mains power adapter  
q Connector plug  
w Long-hair trimmer  
e Switch for the long-hair trimmer  
r Protective cap  
 
- 2 -  
Technical Data  
Note:  
Do not recharge the battery after every use. Only  
recharge the battery when the lowest lamp on the  
battery charge indicator 6 blinks. This will optimise  
the performance of the battery.  
Mains adapter  
Input voltage:  
100 - 240 V  
50/60Hz  
~
Output Voltage:  
4.5 V  
1000 mA  
Men‘s Shaver  
Input voltage:  
Shaving using the power adapter  
4,5 V  
1000 mA  
+
Should you wish to use the Men‘s Shaver without first  
charging the battery, you can do so by using energy  
directly from the mains power adapter 0:  
1. Insert the connector plug q into the socket 7  
on the Men‘s Shaver. Pay heed to the correct po-  
larity: The guide pillar in the socket 7 must grip  
the guide rail on the connector plug q. If it does  
not, the connector plug q cannot be inserted.  
2. Connect the plug with a mains power socket.  
Wait for 3 - 5 minutes.  
Protection class:  
IPX4  
Shaving without the power cable  
This Men‘s Shaver can be used without the power  
cable. In this case, the appliance must be charged  
up before the first usage.  
1. Insert the connector plug q into the socket 7  
on the Men‘s Shaver. Pay heed to the correct po-  
larity: The guide pillar in the socket 7 must grip  
the guide rail on the connector plug q. If it does  
not, the connector plug q cannot be inserted.  
2. Connect the plug with a mains power socket.  
The Men‘s Shaver can then be used.  
Intended purpose  
Shaving  
The battery will be charged. The battery charge  
indicator 6 blinks. The more lamps in the battery  
charge indicator 6 there are that glow permanently,  
the higher the current charge is. When the appliance  
is completely charged (all lamps on the battery charge  
indicator 6 glow), remove the mains power adap-  
ter 0 from the socket 7 and separate it from the  
mains power supply. The Men‘s Shaver can now be  
used without the power cable.  
Note:  
The best shave is achieved with dry skin.  
1. Remove the protective cap r.  
2. Press the locking switch 4 and, at the same  
time, slide the On/Off switch 5 upwards.  
The cutting heads rotate.  
Note:  
3. Guide the cutting heads 1 with straight and  
circular movements over the skin.  
Should the batteries be completely discharged, the  
recharging process requires approx. 90 minutes. Af-  
ter recharging you can use the Men‘s Shaver for  
approx 60 minutes.  
Note:  
In the first 2 to 3 weeks you could suffer some light  
skin irritation, until your skin has got used to the  
cutting heads. Should the skin irritation continue  
beyond this time, consult your doctor.  
Download from Www.Somanuals.co-m3.-All Manuals Search And Download.  
4. When you have finished shaving, slide the  
On/Off switch 5 downwards.  
When you have acquired a new set of cutters 2,  
remove the old set of cutters 2:  
5. Clean the appliance as described in the chapter  
"Cleaning and Care".  
1. Press the release button 3. The cutting unit 2  
springs up.  
2. Extend the cutting unit 2 a little, so that it allows  
itself to be pulled upwards.  
3. Replace the new cutting unit 2 back onto the  
Men‘s Shaver. Ensure that it engages and sits  
firmly.  
Trimming  
The long-hair trimmer w integrated onto the Men‘s Sha-  
ver is suitable for trimming sideboards and moustaches.  
1. Slide the switch for the long-hair trimmer e  
upwards. The long-hair trimmer w raises itself.  
2. Press the locking switch 4 and, at the same  
time, slide the On/Off switch 5 upwards.  
The long-hair trimmer w is running.  
Cleaning and care  
Risk of electric shock!  
You can now trim the hairs as required.  
Always remove the mains power plug before cleaning  
the appliance! Otherwise, there is the great risk of re-  
ceiving an electric shock!  
3. When you have finished trimming, slide the  
On/Off switch 5 downwards.  
4. Remove any loose hairs on the long-hair trimmer w  
with the brush 9.  
5. Slide the switch for the long-hair trimmer e  
downwards. The long-hair trimmer w lowers  
itself.  
Attention!  
Do not use abrasive, chemical or caustic cleaning  
agents to clean this appliance. They could irreparably  
damage the appliance.  
Cleaning with the brush  
Clean the cutting heads 1 with the brush 9 after  
every shave.  
1. Press the release button 3, so that the cutting  
unit 2 springs up.  
Changing the cutters  
Risk of electric shock!  
2. Carefully tap the cutting unit 2 on a smooth  
surface or blow the hair trimmings away.  
3. Use the brush to remove the remaining hair  
trimmings.  
Before changing the cutters 2 ALWAYS disconnect  
the mains power plug! Otherwise, there is the great  
risk of receiving an electric shock!  
If...  
Cleaning under running water  
The cutting unit 2 is suitable for cleaning un-  
der running water.  
1. Press the release button 3, so that the cutting  
unit 2 springs up.  
2. Hold the cutting unit 2 under the flow of water  
so that the water runs from the inside to the outside,  
through the cutting heads 1.  
- ... the shave is noticeably unsatisfactory,...  
- ... you must run the Men‘s Shaver over the same spot  
several times to obtain an acceptable result,...  
- ... shaving takes noticeably longer,...  
- ... damage is visible on the cutters 2,...  
... the cutters 2 must be exchanged.  
New cutters can be obtained with the enclosed  
order form.  
 
- 4 -  
Attention!  
4. Clean all parts under running water and then  
allow them to dry completely.  
Ensure that you hold ONLY the cutting unit 2 under  
the flow of water! The hand element of this Men‘s  
Shaver is protected only against spray water, it  
could be irreparably damaged if it is held under  
running water.  
5. Reassembly of the cutters 2. To secure it, press  
the pin marked with arrows in the middle of the  
cutters 2 down and then turn it in the direction  
of the arrows until the mounting of the cutters no  
longer allows itself to be lifted.  
3. Allow the cutting unit 2 to dry out completely  
6. Remove any loose hairs on the cutting unit with  
the brush 9.  
before using the razor again.  
7. Replace the cutting unit 2 back onto the Men‘s  
Shaver. Ensure that it engages and sits firmly.  
Thorough cleaning  
For a thorough cleaning remove the cutting unit 2:  
1. Press the release button 3. The cutting unit 2  
springs up.  
• Clean the housing and the power adapter 0  
with a moist cloth.  
2. Extend the cutting unit 2 a little, so that it allows  
itself to be pulled upwards.  
3. Press the pin marked with arrows in the middle of  
the cutters 2 down a little. Carefully turn it the  
direction of the arrows until the mounting of the  
cutters allows itself to be lifted (see illustration).  
• Clean the long-hair trimmer w after every use  
with the brush 9. Lubricate the long-hair trimmer w  
approx. every 6 months with a drop of sewing  
machine oil.  
Storage  
Attention!  
Never keep the Men‘s Shaver in its storage case 8  
when the battery is being charged! Risk of overhea-  
ting!  
if you do not intend to use the Men‘s Shaver for an ex-  
tended period, or you are transporting it, place it in  
its storage case 8. Ensure that the Men‘s Shaver is  
clean and completely dry.  
Store the Men‘s Shaver at a clean and dry location.  
Download from Www.Somanuals.co-m5.-All Manuals Search And Download.  
Disposal  
Warranty and Service  
Under no circumstances may the ap-  
You receive a 3-year warranty for this appliance as  
of the purchase date. This appliance has been manu-  
factured with care and meticulously examined be-  
fore delivery. Please retain your receipt as proof of  
purchase. In the case of a warranty claim, please  
make contact by telephone with our service depart-  
ment. Only in this way can a post-free despatch for  
your goods be assured.  
The warranty covers only claims for material and  
manufacturing defects, not for wearing parts or for  
damage to fragile components, e.g. buttons or bat-  
teries. This product is for private use only and is not  
intended for commercial applications.  
pliance be disposed of with normal  
household waste. This product is  
subject to the provisions of European  
Directive 2002/96/EC.  
Dispose of the appliance through an approved waste  
disposal centre or at your community waste facility.  
Observe the currently applicable regulations.  
In case of doubt, please contact your waste disposal  
centre.  
Disposal of batteries/cells  
Used batteries/cells may not be disposed of in house-  
hold waste. Every consumer is statutorily obliged to  
dispose of batteries/cells at a collection site in their  
community/city district or at a retail store.  
The purpose of this obligation is to ensure that batte-  
ries/cells are disposed of in a non-polluting manner.  
Only dispose of batteries/cells when they are fully  
discharged.  
In the event of misuse and improper handling, use of  
force and interference not carried out by our autho-  
rized service branch, the warranty will become  
void. Your statutory rights are not restricted in any  
way by this warranty.  
DES Ltd  
Units 14-15  
Bilston Industrial Estate  
Oxford Street  
Bilston  
Dispose of all packaging materials in an  
environmentally friendly manner.  
WV14 7EG  
Tel.: 0870/787-6177  
Fax: 0870/787-6168  
Kompernass Service Ireland  
Tel: 1850 930 412 (0,082 EUR/Min.)  
Standard call rates apply. Mobile operators may vary.  
 
- 6 -  
Importer  
KOMPERNASS GMBH  
BURGSTRASSE 21  
44867 BOCHUM, GERMANY  
Download from Www.Somanuals.co-m7.-All Manuals Search And Download.  

IOGear Switch 84B User Manual
JBL Speaker E150P User Manual
JBL Speaker STUDIO180 User Manual
Jensen Car Satellite Radio System SRP2002 User Manual
John Deere Cordless Saw ET 3406 J User Manual
Kenwood CD Player DPF J5010 User Manual
Keys Fitness Fitness Equipment STDFR B User Manual
King Canada Saw KC 5010 User Manual
Konica Minolta Digital Camera KD 220Z User Manual
Koolatron Refrigerator WC18 User Manual